XM Satellite Radio AA-RU5HC-TE Manual Do Utilizador
SSSU Command Reference
42
Command View EVA Storage System Scripting Utility Reference Guide
Use the ADD SYSTEM command to initialize an uninitialized storage system and
to create a default disk group. You must select an uninitialized storage system
before issuing the ADD SYSTEM command. If the system is already initialized,
the command is rejected.
to create a default disk group. You must select an uninitialized storage system
before issuing the ADD SYSTEM command. If the system is already initialized,
the command is rejected.
Use the SHOW SYSTEM command (see “
” on page 100) to
display the names of the available uninitialized storage systems. The uninitialized
storage system display as
storage system display as
Uninitialized Storage System#>
, in which
# represents a number. After initialization is complete, SSSU changes its default
prompt back to
prompt back to
NoSystemSelected>
.
Because the system’s name changed from the uninitialized string to the name
given with the ADD SYSTEM command, you must reselect the system. Issue the
SELECT SYSTEM command using the new name of the system.
given with the ADD SYSTEM command, you must reselect the system. Issue the
SELECT SYSTEM command using the new name of the system.
Note:
includes a configuration example that explains the sequence of
commands you can use to initialize an uninitialized storage system (see “
Syntax
ADD SYSTEM <system_name>
Switches
The following switches are available with the ADD SYSTEM command.
COMMENT=
This is an optional switch that associates a user-defined comment with the new
system. A maximum of 128 characters is allowed, and the string must be enclosed
in double quotes.
system. A maximum of 128 characters is allowed, and the string must be enclosed
in double quotes.
CONSOLE_LUN_ID=
The LUN used for console communication after system creation. If set to zero, no
console LUN is presented to the host.
console LUN is presented to the host.
ADD SYSTEM