Symantec Patio Umbrella 10024709 Manual Do Utilizador
173
Command-line switches
-CRC32 switch usage
The following parameters can be used with the -CRC32 switch:
Examples of -CRC32 usage
This table provides some examples of how you can use the -CRC32 switch.
Table A-7
Parameters for the -CRC32 switches
Parameter
Explanation
create
Create an ASCII CRC32 file from a disk
verify
Verify a disk from a CRC32 file
pcreate
Create an ASCII CRC32 file from a partition
pverify
Verify a partition from an ASCII CRC32 file
dcreate
Create an ASCII CRC32 file from an image file
dverify
Verify an image file from an ASCII CRC32 file
crcfile
ASCII CRC32 file (default=Ghost.crc)
vlist
Verification list file (default=Ghost.ls)
vexcept
Verification exception file (no default)
Table A-8
-CRC32 usage examples
Switch
Function
ghost.exe -fcr
Creates a CRC32 file (called
Ghost.crc) while making an image
file.
Ghost.crc) while making an image
file.
ghost.exe -fcr=d:\test.crc
Creates a CRC32 file (called Test.crc)
while making an image file.
while making an image file.
ghost.exe -crc32,
action=create,src=1,crcfile=ghost.crc
action=create,src=1,crcfile=ghost.crc
Creates a list of files and CRC32
values for a disk.
values for a disk.
ghost.exe -crc32,action=dverify,src=
x:dumpfile.gho,crcfile=ghost.crc
x:dumpfile.gho,crcfile=ghost.crc
Verifies the list against an image file.
ghost.exe -crc32,action=pverify,src=
1:2,crcfile=filename.crc:2
1:2,crcfile=filename.crc:2
Verifies a partition in an image file
with multiple partitions. This
example verifies that partition 2 on
disk 1 is the same as partition 2 in the
CRC file.
with multiple partitions. This
example verifies that partition 2 on
disk 1 is the same as partition 2 in the
CRC file.