Symantec NETBACKUP 7 Manual Do Utilizador
To prohibit reverse host name lookup by using the
bpsetconfig
command
◆
Enter the following command on each media server that you use for
deduplication:
deduplication:
echo REVERSE_NAME_LOOKUP = PROHIBITED | bpsetconfig -h host_name
The
bpsetconfig
command resides in the following directories:
UNIX:
/usr/openv/netbackup/bin/admincmd
Windows:
install_path\Veritas\NetBackup\bin\admincmd
The disk pool wizard does not display a volume
The Disk Pool Configuration Wizard does not display a disk volume for the
deduplication storage server.
deduplication storage server.
First, restart all of the NetBackup daemons or services. The step ensures that the
NetBackup Deduplication Engine is up and ready to respond to requests.
NetBackup Deduplication Engine is up and ready to respond to requests.
Second, restart the NetBackup Administration Console. This step clears cached
information from the failed attempt to display the disk volume.
information from the failed attempt to display the disk volume.
Troubleshooting operational issues
The following sections may help you troubleshoot operational issues.
See
on page 95.
See
on page 96.
See
on page 96.
See
on page 97.
Verify that the server has sufficient memory
Insufficient memory on the storage server can cause operation problems. If you
have operation issues, you should verify that your storage server has sufficient
memory.
have operation issues, you should verify that your storage server has sufficient
memory.
See
on page 23.
If the NetBackup deduplication processes do no start on Red Hat Linux, configure
shared memory to be at least 128 MB (
shared memory to be at least 128 MB (
SHMMAX=128MB
).
95
Troubleshooting
Troubleshooting operational issues