Solid State Logic 4.3 Manual Do Utilizador
Soundscape Mixpander
Page 52 of 59
Click the Input tab (if needed) and right-click in the window to create the required number of
stereo input buses. Then click the Output tab and right-click in the window to create the required
number of stereo output buses. You should see the Soundscape streams appear incrementally in
the “ASIO Device Port” column as you create input and output buses:
stereo input buses. Then click the Output tab and right-click in the window to create the required
number of stereo output buses. You should see the Soundscape streams appear incrementally in
the “ASIO Device Port” column as you create input and output buses:
NOTE: If needed, you can change an “ASIO Device Port” by clicking its name in the column to the
right and selecting another input or output stream in the menu that will be displayed.
right and selecting another input or output stream in the menu that will be displayed.
7. Make sure the top part of the Cubase Mixer (Input/Output Settings) is displayed. If it is not, click
the corresponding button, located to the left of the Mixer, so that it is displayed:
NOTE: The Cubase Mixer is divided vertically in three segments. The audio track channel inputs
and outputs are shown in the top segment, which is displayed when the top segment of the button is
lit.
and outputs are shown in the top segment, which is displayed when the top segment of the button is
lit.