Sierra 200 Manual Do Utilizador

  3 

Introduction 

 
This manual provides all the basic information you need to know to get your control 
system installed, configured and on the air quickly.  The control system is designed to 
work "out of the box" in a standard configuration.   
 
In most installations, all that is required is making the physical connections to power 
and the radio equipment and setting a few basic configuration parameters such as call 
sign and unlock code (password) and you are on the air.   
 
The control system can be tailored to your particular needs in many ways.  This manual 
will give you a good overview of many of the parameters that can be changed to tailor 
your system to meet your specific needs.  Each port can be customized for a particular 
behavior including repeaters, RF links, VOIP links, etc.  Telemetry, command names, 
and many other behaviors can also be customized.   
 
Additional application notes are available on the SRS support web site that provides 
detailed information on a variety of special topics.  
 

 

As you read through this document, from time to time you will see a check box.  This is 
used to get your attention and indicates that this is something you really need to do to 
get your control system working.  This is part of your “basic check list”.  Make sure you 
read these notes. 
 

 

 You will also see open check boxes.  These are for your to check them off as you go 

to make sure you follow all the important steps.