Sierra Wireless RAVEN 1X 20070914 Manual Do Utilizador
Raven 1x
99
20070914
*NETOP?
The current cellular carrier from the modemʹs firmware
version, for example, Sprint.
version, for example, Sprint.
*NETRSSI?
The current RSSI (Receive Signal Strength Indicator) of the
Raven as a negative dBm value.
Raven as a negative dBm value.
Tip: The same information is displayed with the command S202?.
*NETSERV?
The type of service being used by the modem, for example
Tech.
Tech.
*NETSTATE?
The current network state:
•
Connecting To Network: The Raven is in the process of
trying to connect to the cellular network.
trying to connect to the cellular network.
•
Network Authentication Fail: Authentication to the
cellular network has failed. Verify settings to activate the
Raven.
cellular network has failed. Verify settings to activate the
Raven.
•
Data Connection Failed: The Raven failed to connect, and
it is now waiting a set time interval before it attempts to
reconnect. Verify settings to activate the Raven.
it is now waiting a set time interval before it attempts to
reconnect. Verify settings to activate the Raven.
•
Network Negotiation Fail: Network connection negoti‐
ation failed. This is usually temporary and often clears up
during a subsequent attempt.
ation failed. This is usually temporary and often clears up
during a subsequent attempt.
•
Network Ready: The Raven is connected to the 1x cellular
network and ready to send data.
network and ready to send data.
•
Network Dormant: The Ravenis connected to the 1x
cellular network, but the link is dormant. It will be woken
up when data is sent or received.
cellular network, but the link is dormant. It will be woken
up when data is sent or received.
•
No Service: There is no cellular network detected.
•
Hardware Reset: The internal module is being reset. This
is a temporary state.
is a temporary state.
*PRLSTATUS?
The status of the most recent PRL Update.
•
0 : None
•
1 : In Progress
•
2 : Success
•
Any other value : Failure