Seiko Group POWERLITE 7500 UB Manual Do Utilizador

Página de 80
22
Setting Up the Projector
Installing Batteries in the Remote Control
The remote control uses two AA batteries.
Warning: Keep batteries away from children. If a battery is swallowed, contact your doctor 
immediately.
1. Release the tab and lift open the cover.
2. Insert two new AA batteries as shown. 
3. Insert the tab on the cover and press it down until it 
clicks into place.
Aim the remote control at the screen, or at the front or 
back of the projector. Make sure you are within 30 feet 
of the projector.
If you suspect the batteries are weak, press the 
illumination button. If the buttons do not 
glow, replace the batteries.
Turning the Projector On and Off
Turning On the Projector
1. Remove the lens cap.
2. Turn on any connected equipment you plan to use.
3. Turn on the main power switch on the back of the projector.
ON