Sanyo PJ MASTER POA-PJNM01 Manual Do Utilizador

Projector firmware updating

Updates the firmware in the multiple projectors all at once.
Before taking the procedure below, put a supplied binary file “****.bin” on the desktop of your 
computer.
1.  Select a target you intend to update the firmware. If you select a top server or a server which has 

the targets, the targets under the selected server are targets to update the firmware. Also you can 
select multiple targets on the status list view window individually.

2. Select 

PJ Update from Update menu.

3. Browse and select a prepared “****.bin” file on the desktop.
4. Click 

Open to execute the updating. The another confirmation dialog will appear.

5.  Click 

Condition if you want to set condition command, or click OK if you want not to set the 

condition command.

  Take below steps if you click 

Condition.

  5-1.  The window to set the condition to execute the updating appears. This is the same setting 

window used in the PJ Global Setting.

  5-2.  Tick check box next to the command name you want to use for condition check. 
   

 *  To make a new condition check command, click Add to open the edit condition window 

and enter command and status, and set retry on or off. See item “Condition setting” (p.28) 
for further details. Click 

OK to set a new condition. The setting window closes.

  5-3. Click OK to start updating.
The updating command is sent to all the target servers and each server starts updating the firmware 
of the projectors sequentially. 
 

 

 

*  To check that the firmware of the target was updated successfully, check the version indication on “PJ 

Ver.” column on the status list view window.

*  If there are disconnected servers during command executing, the upper server monitors connection 

status every 1 minute and keeps command until the command is delivers to all the linked servers.

*  If there are disconnected targets during command executing, the parent server monitors connection 

status every 1 minute and keeps command until the connection is established.

*  This command is only available if the projector supports updating via the network.
* For further information of the binary update file, please consult your sales dealer.

Condition 1
  Command: CF STATUS
  Status:80 
  Retry: ON
Condition 2
  Command: CF MODELNM
  Status:PLC-XF60 
  Retry: OFF