Samsung BD-F5100/ZA Manual Do Produto

 * If Source Stream is 2ch, "Re-encoded 

Dolby D" Settings are not applied.

Blu-ray Discs may include three audio streams :

 - Main Feature Audio : The audio soundtrack 

of the main feature.

 - BONUSVIEW audio : An additional 

soundtrack such as the director or actor’s 

commentary.

 - Navigation Sound Effects : When you 

choose a menu navigation selection, a 

Navigation Sound Effect may sound. 

Navigation Sound Effects are different on 

each Blu-ray Disc.

 

✎

NOTES

 ` Be sure to select the correct Digital Output or 

you will hear no sound or just loud noise.

 ` If the HDMI device (AV receiver, TV) is not 

compatible with compressed formats (Dolby 

Digital, DTS), the audio signal outputs as PCM.

 ` Regular DVDs do not have BONUSVIEW audio 

and Navigation Sound Effects.

 ` Some Blu-ray Discs do not have BONUSVIEW 

audio and Navigation Sound Effects.

 ` If you play MPEG audio soundtracks, the audio 

signal outputs as PCM regardless of your 

Digital Output selections (PCM or Bitstream).

 ` If your TV is not compatible with compressed 

multi-channel formats (Dolby Digital, DTS), the 

player may output PCM 2ch downmixed audio 

even though you selected Bitstream (either Re-

encoded or Unprocessed) in the setup menu.

 ` If your TV is not compatible with PCM sampling 

rates over 48kHz, the player may output 48kHz 

downsampled PCM audio even though you set 

PCM Downsampling to Off.

pCm downsampling

Lets you choose to have 96KHz PCM signals 

downsampled to 48KHz before they are 

outputted to an amplifier. Choose only if your 

amplifier or receiver is not compatible with a 

96KHz signal.

dynamic Range Control

Lets you apply dynamic range control to 

Dolby Digital, Dolby Digital Plus, and Dolby 

True HD audio.

•  Auto : Automatically controls the dynamic 

range of Dolby TrueHD audio, based 

on information in the Dolby TrueHD 

soundtrack. 

Also turns dynamic range control on for 

Dolby Digital and Dolby Digital Plus.

•  Off : Leaves the dynamic range uncompressed, 

letting you hear the original sound.

•  On : Turns dynamic range control on for 

all three Dolby formats. Quieter sounds 

are made louder and the volume of loud 

sounds is reduced.

downmixing mode

Lets you select the multi-channel downmix 

method that is compatible with your stereo 

system. You can choose to have the player 

downmix to normal stereo or to surround 

compatible stereo.

Please contact your ISP to find out if your IP 

address is static or dynamic. If it is dynamic 

- and most are - we recommend using the 

Auto procedure for network setup. This is 

easiest and will work in the majority of cases. 

If it is static, you must use the manual set up 

procedure.

Network setup directions start below.

 

✎

NOTES

 ` This unit can only be connected to a Network 

via a wired connection.

Wired Network Settings

1.  In the Home menu, press the ◄► 

buttons to select Settings, and then 

press the v button.

2.  Press the ▲▼ buttons to select 

Network, and then press the v 

button.

3.  Press the ▲▼ buttons to select Wired 

Network Settings, and then press the 

 button. The Wired Network Settings 

screen appears.

4.  In the Internet Protocol Setup field, 

select Auto if it is not selected. (Press 

 to select Auto, and then press v.)

5.  The Auto Function acquires and fills 

in the values for Ip Address, Subnet 

mask, etc., automatically.

 

✎

NOTES

 ` This process can take up to five minutes.

6.  After the Network Function has acquired 

the network values, press the RETURN 

button.

7.  Select Network Test, and then press 

 to ensure the player has connected 

to your network.

8.  When the Network Test is complete, 

press the RETURN twice to return to 

the Main Menu.

9.  If the Network Function does not acquire 

the network values, go to the directions 

for Manual Setup.

manual Network Setup

Before you start manual network setup, you 

need the network setting values.

To get the network setting values, contact 

your ISP (Internet Service Provider) or your 

network administrator. 

player, follow these steps:
1.  In the Home menu, press the ◄► 

buttons to select Settings, and then 

press the v button.

2.  Press the ▲▼ buttons to select 

Network, and then press the v 

button.

Display
Audio

Network

System
Language
Security
General
Support

Settings 

Wired Network Settings

Internet Protocol Setup  : Auto 

IP Address 

:  0

 

0

 

0

 

0  

Subnet Mask 

:  0

 

0

 

0

 

0

Gateway : 

0

 

0

 

0

 

0

 

DNS 

: Auto

DNS Server 

:

 

0

 

0

 

0

 

0

 

 Move  " Select  ' Return