Samsung BD-F5100/ZA Manual Do Produto

By USB

To upgrade by USB, follow these steps:
1. Visit www.samsung.com/bluraysupport.
2. Download the latest USB software

upgrade zip archive to your computer.

3. Unzip the zip archive to your computer.

You should have a single RUF file with

the same name as the zip file.

4. Copy the RUF file to a USB flash drive.
5. Make sure there is no disc in the player,

and then insert the USB flash drive into

the USB port of the player.

6. In the player’s menu, go to Settings >

Support > Software Upgrade.

7. Select By USB.

✎

NOTES

` No disc should be in the product when you

upgrade the software using the USB Host jack.

` When the software upgrade is done, check the

software details in the software Upgrade menu.

` Do not turn off the player during the software

upgrade. It may cause the player to malfunction.

` Software upgrades using the USB Host jack

must be performed with a USB flash memory

stick only.

Auto Upgrade Notification

If you have connected the player to your

network, and then set Auto Upgrade

Notification on, the player automatically

notifies you when a new software version is

available for the player.

To set Auto Upgrade Notification on, follow

these steps:

1. Select Auto Upgrade Notification, and

then press the v button.

2. Use the ▲▼ buttons to select On, and

then press the v button.

If there is a new software version available,

the player notifies you with a popup message.
1. To upgrade the firmware, select yes

in the Pop-up. The player turns off

automatically, then restarts, and begins

the download. (Never turn the player on

or off manually during an upgrade.)

2. The update progress popup appears.

3. When the update is complete, the player

turns off again automatically.

4. Press the pOWER button to turn on the

player.

✎

NOTES

` The update is complete when the player turns

off after restarting. Press the POWER button to

turn on the updated player for your use.

` Never turn the player off or on manually during

the update process.

` Samsung Electronics takes no legal

responsibility for player malfunction caused by

an unstable Internet connection or consumer

negligence during software upgrade.

Contact Samsung

Provides contact information for assistance

with your player.

Lets you view the general disclaimer regarding

third party contents and services.

Reset

Returns all settings to their factory defaults

except for the network settings.

Media Play

Playing a Commercially Recorded

Disc

1. Press the 8 button to open the disc

tray.

2. Place a disc gently into the disc tray

with the disc's label facing up.

3. Press the 8 button to close the disc

tray. Playback starts automatically.

Playing Files on a USB Device

You can play multimedia files located on a

USB storage device.
1. Move to the Home menu.
2. In Stop mode, connect the USB storage

device to the USB port on the front

panel of the player.

The message "Do you want to access

the device?" is displayed.

3. Press the ◄► button to select yes, and

then press the v button.

4. If you have a disc in the Blu-ray player,

press the REd (A) or BLUE (d) button.

If you do not, go to Step 6.

If you pressed the REd (A) button, go to

Step 5.

If you pressed the BLUE (d) button, go

to Step 5

-1

5. Press the ▲▼ buttons to select USB,

and then press the v button.

6. Press the ◄► buttons to select Videos,

music, or photos, and then press the

button. Go to Step 7.

-1

. Press the ◄► buttons to select USB,

then press the v button.

-1

. Press the ▲▼ buttons to select Videos,

music or photos, and then press the

button.

7. A screen appears listing the contents

of the device. Depending on how the

contents are arranged, you will see

either folders, individual files, or both.

8. If necessary, use the ▲▼◄►buttons to

select a folder, and then press the v

button.

123 a Change Device c Safely Remove USB d View Devices " Enter

Videos

Pandora

YouTube

Photos

Music

Settings

No Disc
123
a

123 d Home " Enter

123

Netflix

Pandora

YouTube

Settings