Sampo DR-S0426 Manual Do Utilizador
20
7
External alarm connector
External alarm functions only when DVR has been set under recording mode. 4 input
ports to receive signals from external alarm and GND port for termination. When
external alarm is triggered, currents will be grounded through GND port to activate the
external alarm.
External alarm functions only when DVR has been set under recording mode. 4 input
ports to receive signals from external alarm and GND port for termination. When
external alarm is triggered, currents will be grounded through GND port to activate the
external alarm.
a. Texts "ALM" will be displayed on OSD corresponding channel.
b. Relay action.
c. Recording speed will be switch from normal mode to alarm mode (refer to chapter
b. Relay action.
c. Recording speed will be switch from normal mode to alarm mode (refer to chapter
4 about recording setting).
d. If setting "A" has been set in schedule recording, will only perform recording when
alarm is triggered during schedule "A" period.
Terminal connector：
Pin 1-4 ----- ALARM1-ALARM4，Camera alarm input.
GND ----- GND
N.C ----- Relay N.C，Alarm output N.C
N.C ----- Relay N.C，Alarm output N.C
COM ----- Relay COM
N.O ----- Relay N.O，Alarm output N.O
N.O ----- Relay N.O，Alarm output N.O