Ryobi Cordless Saw TS1343L Manual Do Utilizador

28

Laser radiation. Avoid direct eye contact with light source.

Use of controls or adjustments or performance of pro-
cedures other than those specified herein may result in 
hazardous radiation exposure.

See Figure 37.


  Use the work clamp or a C-clamp to secure a piece of 

scrap wood.



  Plug the saw into the power source and make a slight 

cut to score the wood.



  Release the switch trigger and allow the saw blade to 

stop rotating before raising the blade.



  Raise the saw arm.



  Unplug the saw.



  To adjust the laser, loosen the laser adjustment screw 

using the Phillips end of the supplied blade wrench.

 

NOTE: When properly aligned, the laser should be on the 
left edge of the kerf.



  Once aligned, tighten the screw then remove the blade 

wrench.

Fig. 37