Rotel RMZ-955 Manual Do Utilizador

MULTI-ROOM SYSTEM CONTROLLER RMZ-955

The Rotel RMZ-955 Multi-Room Control System distributes audio
signals from a single set of source components to as many as
four separately controlled remote zones or listening areas. The
centrally located RMZ-955 controller/amplifier contains source
selection, microprocessor controlled communications circuitry
and independent preamplifier/power amplifiers for all zones.

Users can select either of two ways to control remote zone op-
eration. The first is the RR-952 hand held remote. This generates
infrared (IR) control pulses read by the wall-mounted RSM-901
sensor/display. The RSM-901 sensor/display then transmits com-
mands to the RMZ-955 through hard-wired connections.

The second method uses the wall-mounted RKP-901 keypad to
transmit commands directly to the RMZ-955. The RKP-901 is also
hard-wired to the RMZ-955 controller/amplifier.

Users can select a combination of sensor and keypad operation
for any zone. The system accepts inputs from up to three sensor/
displays and three keypads (for a total of six input devices) per
zone.

The Rotel RMZ-955 Multi-Room Control System is exceptionally
flexible. In addition to the RMZ-955 controller/amplifier, a simple
two zone system might include just one RR-952 hand held con-
troller/RSM-901 IR sensor/display combination for one zone and
one RKP-901 keypad in the second.

In a more elaborate configuration, a single RMZ-955 accepts
commands from four separate zones via twelve IR sensor/dis-
plays and twelve keypads.

Up to four RMZ-955 controllers can be linked together for a sys-
tem with as many as sixteen independent zones.

• Keypad or handheld remote operation of source components. No

programming required – built-in codes for Rotel and other popu-
lar components.

• Single button operation for source selection and “play”.

• Full user control, including system standby from any zone.

• Built-in Paging input with muting in selected zones.

• Near-universal Infra-red repeating system. Remote control avail-

able even when a zone is not active.

• Alarm clock function with independent wake-up in each zone.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Component Description

MULTI-ZONE CUSTOM CONTROLLER   RMZ-955

ZONE A

ACTIVE

CODE

ZONE B

ACTIVE

CODE

ZONE C

ACTIVE CODE

ZONE D

ACTIVE CODE

DIGITALLY CONTROLLED AUDIO PROCESSING

I.R. TRANSMITTER

POWER

MULTI-ZONE CUSTOM CONTROLLER   RMZ-955

ZONE A

ACTIVE CODE

ZONE B

ACTIVE CODE

ZONE C

ACTIVE CODE

ZONE D

ACTIVE CODE

DIGITALLY CONTROLLED AUDIO PROCESSING

I.R. TRANSMITTER

POWER

The RMZ-955 Controller/Amplifier is the heart of the RMZ-955
Multi-Room Control System, featuring:

• Four separate microprocessor-controlled stereo preamplifier/

power amplifier sections, one for each remote zone

• RCA inputs for up to four sources

• “Loop through” RCA outputs which allow multiple RMZ-955 con-

trollers to be linked together for large systems up to 16 zones.

• RCA line level preamp outputs for use with external amplifier

systems. These outputs can be internally configured to provide a
variable level signal or a fixed level signal.

• Screw-type quick connect speaker outputs

• Control data input for each zone is via industry-standard 6 pin

Methode connectors

• 3.5 mm stereo jack “AC Link” connections for full system control

from any zone in large, multi-controller systems

• RCA output jack for RC-5 remote control protocol components

• High power front panel IR flood emitter to transmit remote zone

commands to associated source components

• Four mini-plug IR repeater outputs

• Two polarized AC convenience outlets with 100 watts capacity

each: one switched to allow easy remote control of total system
power if desired, the other unswitched

• Front panel LED indicators for Power On/Off, zone status, com-

mand pulse processing

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

System Planning

The RMZ-955 is designed to be used as a stand-alone control
center for a multi-zone distribution system using dedicated
source components. It features loop-through source connec-