Rocketfish RF-TRP47C Folheto

RF-TRP47C  

  47" Carbon Fiber Tripod 

1 

Quick-release mounting plate 

Mount your device to this removable plate.

2 

1/4" screw 

Tighten to secure your device to the mounting plate. 

3 

Mounting base plate  

Slide the quick-release mounting plate into this base plate.

4 

Variable angle head ball 

Allows the head to be adjusted to any angle.

5 

Safety lock pin 

Prevents the mounting plate from falling out when the 

 

 

quick-release plate locking knob is released.

6 

Pan locking knob 

Locks the horizontal movement of the head.

7 

Quick-release plate locking knob 

Locks the quick-release mounting base plate to the tripod.

8 

Head ball locking knob 

Sets the head at different angle. Loosen to permit movement 

 

 

of the head ball. Tighten to stop movement of the head ball.

•  Tripod with pan head
• Mounting 

plate

Note: mounting plate is on the pan head.

• Wrench 

(1)

•  Make sure that all levers, handles, knobs, and leg locks are correctly tightened, 

and that all three legs are fully opened before use.

•  Do not carry or transport the tripod with camera or camcorder equipment 

attached (for example, over your shoulder or cradled in your arms).

•  Do not store or expose your tripod to excessive heat or cold, or use near any 

flame or fire.

•  Do not oil or grease any part of the tripod.
•  Do not use any solvents or thinners to clean your tripod. 

Use only a mild detergent and wipe dry with only a soft, lint-free cloth.

•  Do not exceed the load limit of this product. (See Specifications)

To set up your tripod:
1  Unscrew the leg locks on each leg (three per leg) and extend the legs to the 

desired length.

2  Tighten the leg locks to lock the legs at the selected length.

Caution: Incorrectly securing a leg lock can cause the tripod leg to retract 
unexpectedly and could result in damage to the tripod or to the attached 
camera or camcorder.

3  Press the variable leg angle release at the top of each tripod leg to spread the 

legs to the first preset angle. When each leg has been locked into the first 
preset angle, set the tripod on a firm surface.

4  Adjust the center column by unscrewing the center column lock, raising the 

center column to the desired height, then tightening the center column lock.

5  To remove the mounting plate, unscrew the quick-release plate locking knob, 

then press the safety lock pin and lift the plate away from the head.

6  Secure your camera or camcorder to the mounting plate with the 1/4" screw 

on the bottom of the plate. Tighten the screw firmly to avoid unintended 
lateral movement of your device.

Visit www.rocketfishproducts.com for details.

For customer service please call 1-800-620-2790
www.rocketfishproducts.com

Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN 55423-3645 USA

© 2010 BBY Solutions, Inc., All Rights Reserved. ROCKETFISH is a trademark of 
BBY Solutions, Inc. All other products and brand names are trademarks of their 
respective owners.

Best Buy Imports, S. de R.L. de C.V. Av. Santa Fe 485, Segundo Piso, Colonia Cruz 
Manca, Programa Parcial de Desarrollo Santa Fe, Delegación Cuajimalpa, Distrito 
Federal, México 05349

© 2010 Best Buy UK Distributions Limited. All rights reserved. Distributed by Best 
Buy Europe Distributions Limited. 1 Portal Way, London W3 6RS

ENGLISH 10-0541

Press button, 
angle adjustable

Leg 
angle-adjustment

Raise center 

column

Leg folded

RF-TRP47C 

21.2 in 

14.5 in 

47 in 

.91 in 

2.89 lbs. 

15.4 lbs.

 

(540 mm) 

(368 mm) 

(1194 mm) 

(23 mm) 

(1300 g) 

(6.9 kg)

Loosen center 
column

Center column lock