Roadmaster Multi-Media Headunit VRVD630 Manual Do Utilizador
9
Installation
Remove the
half sleeve
A
E
IMPORTANT!
BEFORE THE FINAL INSTALLATION OF THE HEAD UNIT, CONNECT THE WIRING
TEMPORARILY, MAKING SURE THE UNIT AND THE SYSTEM WORK PROPERLY.
DIN FRONT-MOUNT (Method A)
After inserting the Mounting Sleeve
into the dashboard, select tabs
on top, bottom, and sides, then
bend them to secure the mounting
sleeve in the dash board.(Fig. 2)
into the dashboard, select tabs
on top, bottom, and sides, then
bend them to secure the mounting
sleeve in the dash board.(Fig. 2)
2. Mounting
Sleeve
3.
Screw
1.
Dashboard
Bend the tabs
to secure the
Mounting Sleeve
in the dashboard.
to secure the
Mounting Sleeve
in the dashboard.
Fig. 2
Follow the diagram in Fig.
for installing the rear mounting
strap to the head unit. The rear
mounting strap will help keep
the head unit from moving
around inside the dashboard.
for installing the rear mounting
strap to the head unit. The rear
mounting strap will help keep
the head unit from moving
around inside the dashboard.
Insert fingers into the groove in the front
of frame to remove it.
Insert the buttons supplied with the old
unit into the grooves on both sides of the
old unit. The unit can be installed or re-
moved from the dashboard using these
buttons. (Fig. )
of frame to remove it.
Insert the buttons supplied with the old
unit into the grooves on both sides of the
old unit. The unit can be installed or re-
moved from the dashboard using these
buttons. (Fig. )
. Dashboard
2. Nut (5mm)
. Spring washer
4. Screw (5 x 25mm)
5. Screw
6. Strap
7. Plain washer
2. Nut (5mm)
. Spring washer
4. Screw (5 x 25mm)
5. Screw
6. Strap
7. Plain washer
Fig.
Fig.