Ricoh feeder Manual Do Utilizador

Troubleshooting When Using the Copy Function

28

Images appear only par-
tially.

The paper is damp.

Use paper that has been stored in the 
recommended temperature and hu-
midity condition. See “Copy Paper”, 
About This Machine.

Black lines appear.

The exposure glass is 
dirty.

White lines appear.

The exposure glass is 
dirty.

White lines appear.

When D is blinking, ton-
er is beginning to run out.

Add toner. See p.87 “Adding Toner”.

Copies are blank.

The original is not set cor-
rectly.

When using the exposure glass, face the 
originals down. When using the ADF, 
face them up.

A moiré pattern is pro-
duced on copies.

Your original has a dot 
pattern image or many 
lines.

Place the original on the exposure glass 
at a slight angle.

Black spots appear on the 
copy of a photographic 
print.

Because of high humidi-
ty, the photographic print 
has stuck to the exposure 
glass.

Place the print on the exposure glass in 
either of the following ways:

• Place an OHP transparency on the 

exposure glass, and then place the 
print on top of the OHP transparen-
cy.

• Place the print on the exposure 

glass, and then place two or three 
sheets of white paper on top of it. 
Leave the auto-document feeder 
(ADF) open when copying.