Ricoh feeder Manual Do Utilizador

Troubleshooting When Using the Printer Function

46

Images are printed at 
slant.

The tray's side fences 
might not be locked.

Check the side fences are locked. See p.75 
“Changing the Paper Size”.

Print is slanted.

The paper is feeding 
in at a slant.

Load the paper correctly. See p.65 “Loading 
paper”.

Misfeeds occur fre-
quently.

The number of sheets 
loaded exceeds the ca-
pacity of the machine.

Load paper only as high as the upper limit mark-
ings on the side fences of the paper tray or bypass 
tray. See “Copy Paper”, About This Machine.

Misfeeds occur fre-
quently.

The paper is damp.

Use paper that has been stored in the recom-
mended temperature and humidity condition. 
See “Copy Paper”, About This Machine.

Misfeeds occur fre-
quently.

The paper is too thick 
or too thin.

Use recommended paper. See “Copy Paper”, 
About This Machine.

Misfeeds occur fre-
quently.

The copy paper is 
wrinkled or has been 
folded/creased.

Use recommended paper. Use paper that has 
been stored in the recommended temperature 
and humidity condition. See “Copy Paper”, 
About This Machine.

Misfeeds occur fre-
quently.

Printed paper is being 
used.

Use recommended paper. See “Copy Paper”, 
About This Machine.

Copy paper becomes 
creased.

The paper is damp.

Use paper that has been stored in the recom-
mended temperature and humidity condition. 
See “Copy Paper”, About This Machine.

Copy paper becomes 
creased.

The paper is too thin.

Use recommended paper. See “Copy Paper”, 
About This Machine.

White lines appear.

When D is blinking, 
toner is beginning to 
run out.

Add toner. See p.87 “Adding Toner”.

When printing graph-
ics, the output and the 
screen are different.

If the printer driver is 
configured to use the 
graphics command, 
the graphics com-
mand from the ma-
chine is used to print.

If you want to print accurately, set the printer 
driver to print without using the graphics 
command. See the printer driver Help.

Garbled characters 
are printed.

The correct printer 
language might have 
not been selected.

Set the correct printer language.

Images are printed in 
the wrong orienta-
tion.

The feed orientation 
you selected and the 
feed orientation select-
ed in the printer driv-
er's option setup might 
not be the same.

Set the machine's feed orientation and the 
printer driver's feed orientation accordingly. 
See the printer driver Help.

There is considerable 
delay between the 
print start instruction 
and actual printing.

“Off mode / Sleep 
mode” might be set.

The machine requires time to warm up if it has 
been in “Off mode/Sleep mode”. Specify “Off 
mode/Sleep mode” in [System Settings], [Auto 
Off Timer]

.