Ricoh feeder Manual Do Utilizador
Adding paper, Toner and Staples
78
5
Changing the Paper Size in the Large Capacity Tray (Tray 4 and 5)
The following procedure explains how to change a paper size in the LCT (Tray 4
and 5).
and 5).
Important
❒ As for changing paper sizes of Tray 6, contact your service representative.
❒ Check that the paper edges are aligned at the left side.
❒ Do not stack paper over the limit mark.
❒ Check that the paper edges are aligned at the left side.
❒ Do not stack paper over the limit mark.
A
Carefully pull out the paper tray until it stops.
B
Pull out the screws fixing the side fence.
C
Set the side fences to the size you want.
ANQ006S
ANQ020S
ANQ021S