Ricoh RICOH PJ WX4130n Manual Do Utilizador
Ad Hoc mode
This mode communicates with the computer directly, and not via an access point. No other equipment is
required, so this mode is suited for locations that have no network environment.
If you use ad hoc mode, make the following settings:
Settings Using Simple 1:1 Connection
required, so this mode is suited for locations that have no network environment.
If you use ad hoc mode, make the following settings:
Settings Using Simple 1:1 Connection
Action
Method
Refer to
Wireless LAN settings
Simple 1:1 Connection (Network Utility)
Image projection
Simple 1:1 Connection (Network Utility)
Settings Using a USB Memory Device
When the computer is in ad hoc mode, use the following method:
Action
Method
Refer to
Wireless LAN settings
Write Settings to USB Memory (Network
Utility)
Utility)
Image projection
Network Connection (Network Utility)
• As the radio wave range is limited, use an office or conference room with a good line of sight.
• If you are using ad hoc mode, other computers cannot access the projector.
• If you are using ad hoc mode, other computers cannot access the projector.
Infrastructure mode
This mode can communicate with networks in which both wireless and wired LAN devices are connected
via a wireless LAN access terminal. It is necessary to user greater security since all communication is via
a network. Use infrastructure mode in environments in which a wireless LAN has already been
configured.
If you use infrastructure mode, make the following settings:
via a wireless LAN access terminal. It is necessary to user greater security since all communication is via
a network. Use infrastructure mode in environments in which a wireless LAN has already been
configured.
If you use infrastructure mode, make the following settings:
3. Using the Projector via a Network
58