Ricoh 43-3102 Manual Do Utilizador
O
perat
ion
5
12'4#6+10
6
740+0)
"
6*'
"+
06'4%1/
"1
0
"
#0&
"1
((
1
#
&,756+0)
"
6*'
"8
1.7/'
To turn on the intercom, rotate
VOLUME
counterclockwise
until it clicks. POWER/BATT LOW lights. Then adjust
VOLUME
to a comfortable listening level.
To turn off the intercom, rotate
VOLUME
clockwise until it
clicks. POWER
/
BATT LOW turns off.
%
#..+0)
"#
016*'4
"+
06'4%1/
"
#
1. Press
CALL
once. TRANSMIT lights. Each intercom
that is on and set to the selected channel and sub-tone
sounds a tone for about 3 seconds.
sounds a tone for about 3 seconds.
2. Hold down
TALK
and speak in a normal voice after you
hear the beep. When you finish speaking, release
TALK
and listen for the response.
±
/
10+614+0)
"
#0
"+
06'4%1/
You can set any intercom so it continuously transmits
sounds from the area where it is located to another
intercom. You can monitor only one intercom at a time.
sounds from the area where it is located to another
intercom. You can monitor only one intercom at a time.
1. Press
LOCK
on the intercom in the area you want to
monitor. TRANSMIT flashes.
2. When you finish monitoring, release the lock by
pressing
TALK
on the intercom in the area you are
monitoring. TRANSMIT turns off.
After pressing
LOCK
on an intercom, you cannot call or talk
to that intercom until you press
TALK
to release the lock.
%
100'%6+0)
"
#0
"#
7&+1
"5
174%'
"
%QPPGEVKPI"C"5VCPFCTF"#WFKQ"5QWTEG
To transmit audio to each intercom, you can connect one
intercom to an optional audio source such as a radio, tape
player, or CD player using an audio cable (not supplied).
Then, when you turn on the audio source, the intercom
where the audio source is connected broadcasts the sound
to the other intercoms.
intercom to an optional audio source such as a radio, tape
player, or CD player using an audio cable (not supplied).
Then, when you turn on the audio source, the intercom
where the audio source is connected broadcasts the sound
to the other intercoms.
±
±
"016'"
±
"
Calling Another Intercom
•
Only one party can talk on a
channel at a time.
channel at a time.
•
TRANSMIT on the intercom you
are using remains lit as long as
you hold down TALK or CALL.
are using remains lit as long as
you hold down TALK or CALL.
•
RECEIVE/BUSY lights when
you receive a voice message or
when you are monitoring a
locked intercom. RECEIVE/
BUSY flashes if the channel is
being used.
you receive a voice message or
when you are monitoring a
locked intercom. RECEIVE/
BUSY flashes if the channel is
being used.
Connecting a Standard
Audio Source
Audio Source
If your audio source’s cable does
not have the appropriate connector
to attach to the intercom, use an
adapter, available at your local
RadioShack store or at
not have the appropriate connector
to attach to the intercom, use an
adapter, available at your local
RadioShack store or at
RadioShack.com
.
43-3102.fm Page 5 Monday, May 13, 2002 10:01 AM