RGB Spectrum Digital Recording and Streaming System DGy 201x Manual Do Utilizador

. . . . .

This display provides timecode status for the selected clip. Click 
the display to toggle between different counters:

~

In 

 mode, the counter always indicates the date and 

time at the start of the recording for the selected clip. 

~

In 

 mode, the counter displays the traversing 

Timecode of the original recording. 

~

Click on the time field to switch the display to 

Time. 

~

Click again on the time field to switch the display to 

Remaining.

~

Click on the time field to return the display to 

Timecode.

This bar visually indicates the available space on the selected 
disk drive. The solid blue area represents the amount of disk 
used, as a percentage of the whole.

Icons appear in this area to indicate the 

 status:

~

~

~

~

 (+ speed)

~

 

 (+ speed)

~

Entry point set for play loop (pending exit point)

~

A - B  Play Loop active

This line indicates the name of the clip currently recording or 
playing back. Click the 

 label to display the Clip 

Browser window, which enables the selection of clips for 
playback or recording. Refer to the 

 on 

page 35 for details. 

This line indicates the current clip path. Click the 

 label 

to display the Clip Browser window to select clips for playing or 
recording and set the desired path. Refer to the 

 on page 35 for details. 

The 

represents the full clip duration. 

During playback, the “dot” moves to indicate the relative 
playback point within the clip.