Python LIQUID COOLED MILLERMATIC COMPATIBLE 248-8XX Manual Do Utilizador

 Owner's Manual - Page 4

Used to prevent preheating of the wire which may soften it and clog the liner.  

This picking up of current at the drive rolls rather than at the contact tip is 

usually not a problem unless using too large of a contact tip or excessively 

oxidized aluminum wire.
Insulated Groove Drive Roll Kit ......................................................005-0640

For 

.030" (0.8 mm) dia. aluminum wire.  Includes insulated drive roll and idler 

roll assy. 
Insulated Groove Drive Roll Kit ......................................................005-0716

For 

.035" (0.9 mm) dia. aluminum wire.  Includes insulated drive roll  

and idler roll assy. 
Insulated Groove Drive Roll Kit ......................................................005-0642 

For 

.040" (1.0 mm) dia. aluminum wire.  Includes insulated drive roll  

and idler roll assy. 
Insulated Groove Drive Roll Kit ......................................................005-0718

For 

3/64" (1.2 mm) dia. aluminum wire.  Includes insulated drive roll  

and idler roll assy.

Insulated Groove Drive Roll Kit ......................................................005-0644

For 

.062" (1.6 mm) dia. aluminum wire.  Includes insulated drive roll  

and idler roll assy.

Handle Kit Gun .................................................................................005-0699 

Left and right handles, screws and drive roll door, as a replacement for all 

Millermatic Compatible™ Python

®

 guns.

Trigger Kit .........................................................................................005-0694 

Trigger adjustment kit includes a spring and sensitivity adjustment screw 

replacement for all Millermatic Compatible™ Python

®

 guns.

 

Micro Switch Kit ...............................................................................005-0701 

Replacement micro switch assembly for all Millermatic Compatible™ Python

®

 

guns.

Potentiometer Kit .............................................................................005-0695 

Replacement potentiometer assembly for all Millermatic Compatible™ 

Python

®

 guns. 

Barrel Insulator Kit ..........................................................................005-0696 

Replacement barrel insulator and taper lock nut.

 Flat spiral steel conduit for steel & cored wire.

15 ft./4.5m .....................................................................................

25 ft./7.6m .....................................................................................

35 ft/10.7m ....................................................................................

50 ft./15.2m ...................................................................................

A Snake Skin protective cover is standard on the Millermatic Compatible™ 

Python

®

.  See below for replacement part numbers. 

15 ft./4.5m ..........................................................................................

25 ft./7.6m ..........................................................................................

35 ft/10.7m .........................................................................................

50 ft./15.2m ........................................................................................