Python 232-835 Manual Do Utilizador

The laterally-positioned potentiometer is located in the lower end of the 

handle, providing  up to 800 ipm with 3 3/4 turns.
Micro Switch

The micro switch assembly consists of the micro switch, and leads. 
trigger Sensitivity 

The amount of trigger level travel can 

be shortened for a "quicker" or "more 

responsive" action. 
A more sensitive trigger lever is produced 

by reducing the gap between the 

trigger lever and the micro-switch lever. 

By turning-in the Trigger Sensitivity 

Adjustment Screw, it closed the gap 

between the trigger lever and the micro-

switch lever.
This well enable the operator to increase 

the sensitivity of the trigger lever. 
Sensitivity Adjustment

With the wire feeder turned on (with 

or without welding wire loaded), turn 

the screw in until the micro-switch is 

activated. Once activated, the gun and 

wire feeder motors will begin feeding wire. 

Retract the screw accordingly until the 

system is deactivated and adjusted to the 

operators' liking.

The Python

® 

Lincoln Compatible

™ 

gun comes standard with a knurled drive 

roll and a grooved idler roll, which will handle both steel and aluminum wire 

with diameters from .030-1/16 inch.  Optional insulated V-groove drive rolls 

are also available for aluminum wire if desired (see Optional Kits).
Drive roll tension is accomplished with a unique spring-loaded pressure 

screw.  The Python

® 

Lincoln Compatible

™ 

comes from the factory with 

the pressure adjustment screw preset.  

.

1.  Pull the Cam Lever away from the 

idler roll.  This will relieve the pressure 

against the drive roll (as shown in 

Figure 1).

2.  Align the Drive Roll Removal Tool (P/N 931-0100) over the flats of the 

drive roll (as shown in Figure 2).  Hold the gun with one hand or on a