Python 232-835 Manual Do Utilizador

All barrels are rated at 100% duty cycle

 

 

The Python

® 

Lincoln Compatible

™

 gun comes standard with a 60˚ curved 

barrel.  The barrel assembly locks to the gun body using the patented EZ 

Lock™ system.
Optional 6", 12” and 18”  Straight and Curved Barrel Assemblies

6" Straight, Air Cooled Barrel Assembly ...........................................003-2330

6" Curved, 45° Air Cooled Barrel Assembly ......................................003-2331
12" Straight, Air Cooled Barrel Assembly .........................................003-2332

12" Curved, 45° Air Cooled Barrel Assembly ....................................003-2333
18" Straight, Air Cooled Barrel Assembly .........................................003-2334

18" Curved, 45° Air Cooled Barrel Assembly ....................................003-2335
Barrel Removal and installation

To remove the barrel assembly, loosen the patented EZ Lock™ Taper lock 

nut until it is clear of the threads.  Pull barrel out of the gun body.
To replace a barrel assembly, open the drive and idler roll door and seat the 

barrel assembly until the inlet guide is almost touching the drive and idler roll 

and the rear face of the barrel is flush with the aluminum body block.  Take 

care not to damage the “O” rings when inserting into the body.  Tighten taper 

lock nut assembly firmly so that barrel cannot rotate.
Barrel Rotation

To rotate a barrel assembly, loosen the patented EZ Lock™ Taper lock nut 

assembly no more than 1 turn.  Rotate barrel to the position of your choice 

and retighten taper lock nut assembly firmly so that the barrel cannot rotate.
WARNiNG:  Do not attempt to weld without the barrel being tightly 

Your Cobramatic

®

 System is designed to provide years of reliable service.

Maintenance of the gun will normally consist of a general cleaning of the wire 

guide system, including barrels, drive rolls, and conduits at regular intervals.
Remove spatter build-up from inside of nozzles with a hardwood stick.
The only parts on the Cobramatic

®

 system that are subject to normal wear 

931-0137

Teflon liner package, 5 pieces

615-0338

Steel wire only, .030 - .1/16" (0.8 - 0.9mm)

621-0424

Python

®

 tip extender (Air cooled barrel only)

615-0250

Spiral steel liner for tip extender