Psion Teklogix Schnellstart- Anleitung 7525 Manual Do Utilizador

6.21.3  Disconnecting From A Network

To disconnect from the network:

•

Tap on the Disconnect button, and then on OK.

When the WORKABOUT PRO network connection is severed, the Status field 
displays Ready to Connect.

A unit equipped with a GSM/GPRS expansion board displays the signal strength in 
the main Wireless WAN screen, even while a connection is active. Units equipped 
with Sierra Wireless Aircard modems do not display the signal strength while a 
connection is active.The Rx bytes and Tx bytes fields estimate the amount of data 
transmitted and received, respectively.

6.21.3.1

Shutting Down The Wireless WAN User Interface

While it is not usual to shut down the GSM/GPRS user interface, you can 
accomplish this by tapping on File menu and choosing the Exit command in the 
Wireless WAN

 

screen.

6.21.4  Advanced Information

In most cases, when a GSM/GPRS radio and SIM are installed in your hand-held, 
setup is automatic. Follow the steps outlined under the heading “Establishing A 
Connection” on page 143 to make a connection. The information in this section is 
for advanced setup purposes.

6.21.4.1

Entering A PIN Number

If a PIN is required, a PIN entry dialog box is displayed.

Figure 6.52 PIN Number

•

Type your PIN, and press <ENTER>.