Psion Teklogix Schnellstart- Anleitung 7525 Manual Do Utilizador

6.21.5.5

Modem Information

The fields in this dialog box cannot be edited – they only display information about 

the WORKABOUT PRO modem.
If the network operator has not programmed a user’s phone number into his SIM, 

the Phone: field remains empty.
If the main menu shows an error status, at least partial modem information may 

be available.

Modem Power Modes

The power mode of the modem is controlled through the Power icon rather than 
through the Wireless WAN user interface. 

To adjust PC Card and CF card modems settings:

•

Tap on Start, Settings, and then tap on the System tab followed by the 
Power icon. 

•

Tap on the Card Slots tab.

If the checkbox for a modem is unchecked, power is not applied to the modem and a 
driver is not loaded (neither the serial port driver nor the Wireless WAN driver). If 
the checkbox is checked, power is applied to the modem and the drivers are loaded 
when the hand-held is turned on. Power is removed from the modem when the 
WORKABOUT PRO enters suspend mode.

To adjust settings for a modem module that is built into the unit:

•

Tap on Start, Settings, and then tap on the System tab followed by the 
Power icon. 

•

Tap on the Built-In Devices tab.

Disabled

Power is not applied to the modem and a driver is not loaded.

Enabled–Off in Suspend

Power is applied to the modem and the drivers are loaded when the unit is turned on. 
Power is removed from the modem when the hand-held enters suspend mode.