Psion Teklogix Schnellstart- Anleitung 7525 Manual Do Utilizador

Página de 364
Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
283
Chapter 9: Peripheral Devices & Accessories
Important Charger Safety Instructions
To reduce risk of damage to the electric plug and cord when unplugging the 
charger, pull the plug rather than the cord.
Make sure the cord is positioned so that it is not stepped on, tripped over, 
or otherwise subjected to damage or stress.
Do not operate the charger with a damaged cord or plug. 
Replace immediately.
Do not operate the charger if it has received a sharp blow, been dropped, or other-
wise damaged in any way; it should be inspected by qualified service personnel.
Do not disassemble the charger; it should be repaired by qualified service person-
nel. Incorrect reassembly may result in electric shock or fire.
To reduce risk of electric shock, unplug the charger from the outlet before 
attempting any maintenance or cleaning.
An extension cord should not be used unless absolutely necessary. Use of an 
improper extension cord could result in fire or electric shock. 
If an extension cord must be used, make sure:
• The plug pins on the extension cord are the same number, size, 
and shape as those on the charger.
• The extension cord is properly wired and in good electrical 
condition and that the wire size is larger than 16 AWG.
Do not expose the charger to rain or snow.
Do not place batteries in the charger if they are cold from extended 
exposure to a freezer or outside temperatures below 10°C (50°F). Allow them to 
warm up to room temperature for at least two hours.
Do not use the charger if, after an overnight charge, any of the batteries feel warmer 
than the charger housing. The charger should be inspected by 
qualified service personnel.
Do not use the charger if any of the batteries or the charger get more than luke-
warm. The equipment should be inspected by qualified personnel.