PROLINK Modem 9300g Manual Do Utilizador
Hurricane 9300G (802.11g) ADSL2+ Modem Router
Chapter 4: Configuration
98
IGMP
IGMP, known as
Internet Group Management Protocol
, is used to management hosts from
multicast group.
IGMP Forwarding:
Accepting multicast packet. Default is set to
Enable.
IGMP Snooping:
Allowing switched Ethernet to check and make correct forwarding decisions.
Default is set to
Enable
VLAN Bridge
This section allows you to create VLAN group and specify the member.
Edit:
Edit your member ports in selected VLAN group.
Create VLAN:
To create another VLAN group.
Advanced VLAN Setup Example (Triply Play)
VLAN_data:
Ethernet Port 1, Wireless and Wireless WDS are reserving for Internet
- On Ethernet port 1 I also need VC 0/40 bridged.
VLAN_Vedio
Ethernet ports: 2, 3 and 4:
- 0/33 Bi-directional IP
- 0/34 Video
- 0/35 Video
- 0/36 Video Subscriber Services (EPG, EAS, etc.)
- 0/37 Video
- 0/38 Video
- 0/39 Spare
Step 1: Setup Member Ports
Go to
Configuration LAN Bridge Interface.
You can setup member ports for each VLAN group under Bridge Interface section. From the
example, two VLAN groups need to be created.
Ethernet: P1 (Port 1)
Ethernet1: P2, P3 and P4 (Port 2, 3, 4) Please uncheck P2, P3, P4 from Ethernet VLAN Port first.
Note:
You should setup each VLAN group with caution. Each Bridge Interface is arranged in this
order.