ProForm DVDR3570H Manual Do Utilizador

81

Press OK on the remote control to start the automatic TV 

channel search process and replace all previously stored 
analogue TV channels. This process may take several minutes. 

This feature is only available if you have connected this recorder 

to your TV using the EXT1 TO TV scart socket. It allows you 
to copy the preset order from your TV to the recorder 
(analogue channels only). 

1) Press 

OK the remote control to access.

2) Press 

OK to confi rm the message on the TV, ‘TV 01’ 

appears on the display panel. Use the TV’s remote 
control to select programme number {1} at your TV, then 
press OK on the recorder’s remote control.

 

–  If the recorder fi nds the same TV channel as on the TV, 
it stores it as ‘P01’. ‘TV 02’ will then appear on the display 
panel.

 

–  If no video signal is received from the TV, ‘NO TV’ will 
appear.

 

–  If you make a mistake, press BACK button to return to 
‘TV 01’ setting.

3) Use 

the 

TV’s remote control to select programme 

number {2} at your TV, then press OK on the recorder’s 
remote control. Repeat the above steps until you have 
assigned all the TV channels.

4)  To exit the menu, press OPTIONS.

Note:  The Follow TV feature may not work properly on every 

TV.  In case no channels are matched, please proceed with 
manual install.

Use this setting only if the automatic install detected the wrong 

tuner signals.

{ Entry mode }  – Select manual search based on channel 

allocation or frequency entry 
{ CH (channel), S-CH (specifi ed hyperband 
channel), MHz (frequency) }, then press OK.

{ Entry } 

– Use the alphanumeric keypad 0-9 to 

enter the frequency value or the channel 
number, then press OK and the Green 
button for { Store }.

  

OR

 – 

Press 

the 

Blue button on the remote 

control for { Search }, once you have 
found the correct frequency/channel, press 
the Green button for { Store }.