Polycom Welding System 3725-77601-001H Manual Do Utilizador

 

Endpoint Management Overview

Polycom, Inc. 

107

administrative rights can still change the settings on an HDX and RealPresence 

Group Series endpoint after the provisioning bundle is applied. However, if a 

newer bundle is sent by the CMA system, it will overwrite the user’s changes. 
The HDX and RealPresence Group Series system parameters that may be 

provisioned in a bundle are limited to the following types:
• Camera configuration settings
• Monitor configuration settings
• Microphone configuration settings 
• Security settings
• Home screen settings

In dynamic management mode, when an HDX and a RealPresence Group 

Series system starts up and at designated intervals thereafter, it automatically 

polls for new provisioning information from the CMA system. If a 

provisioning bundle exists on the CMA system that matches the model of the 

polling HDX or RealPresence Group Series endpoint, the provisioning bundle 

is sent over a secure HTTPS connection.
Endpoints do not poll for provisioning information if they are in a call. They 

restart polling after the call ends.
Provisioning information is applied in the following order:

Bundled provisioning, if a bundle exists for the same model.

Automatic provisioning profile, if the endpoint is part of a group 

assigned a profile.

Site provisioning, which takes precedence.

For information about how to download a provisioning profile, see 

 on page 182.

The CMA system is a gatekeeper; it manages video and audio endpoints. 

However, the system also manages users, because endpoints are only useful 

when they provide access to users.
Automatic provisioning, which controls the automatic configuration of 

dynamically managed endpoints and the management of its video resources, 

is also tied to users and groups. That’s because some users and groups may 

require significantly more video resources than others.