Polycom Welding System 3725-77601-001H Manual Do Utilizador

Polycom CMA System Operations Guide 

138

Polycom, Inc.

On the CMA system, go to Admin > Management and Security > 

Endpoint Management Settings.

In the Default Passwords for LifeSize Endpoint Management section of 

the Endpoint Management Settings page, enable Use Default 

Passwords.

Enter the Password for SSH User and confirm the password. Refer to the 

LifeSize system documentation for information on using SSH to connect 

to the endpoint, then enter the same SSH password here. 

Enter the Password for Web UI User and confirm the password. Refer to 

the LifeSize system documentation for information on using a web 

browser to connect to the endpoint, then enter the same web UI password 

here. 

Click Update. 

The CMA system can monitor select TANDBERG C Series, TANDBERG Edge, 

and LifeSize Team and Express endpoints, so when properly configured, the 

CMA system can provide online/offline status and alerts, display call status, 

and provide image support including near and far end images for these 

endpoints. 

The following table identifies the fields that the CMA system can provision for 

TANDBERG 150, 990, 880, 770 MXP, and TANDBERG C Series endpoints. 
See the appropriate TANDBERG product documentation for more 

information about these fields and their acceptable values. See 

 on page 186 for information on implementing 

scheduled provisioning of endpoints.

For the CMA system to successfully manage a LifeSize endpoint, SSH must 

be enabled on the endpoint. SSH can be enabled on the endpoint through 

device provisioning.