Polycom Welding System 3725-77601-001H Manual Do Utilizador

 

Endpoint Software Update Operations

Polycom, Inc. 

193

You can restrict automatic software updates of dynamically-managed 

endpoint systems to a scheduled maintenance window.
Typically, automatic software updates occur as specified by the Software 

Update Polling Interval (Admin > Site > Edit Site Provisioning Details > 

Provisioning Settings). Enabling the maintenance window feature in the 

CMA system overrides the Software Update Polling Interval. The CMA 

system provisions the maintenance window to the endpoints, and the 

endpoints hold their automatic software update requests until the 

maintenance window starts.
Some notes about this feature:
• It applies to dynamically-managed HDX and RealPresence Group Series 

systems only.

• To avoid automatically updating the software on all HDX or RealPresence 

Group Series systems at the start of the maintenance window, the systems 

randomize their automatic software update requests.

Go to Admin > Software Update > Automatic Software Update > 

Maintenance Window.

In the Maintenance Window dialog box, click Enable Maintenance 

Window and set a maintenance window Start Time and either an End 

Time or Duration.
Set the maintenance window start time to the endpoint’s system local 

time, not the CMA system local time. For example, if you set the 

maintenance window start time to 3am, the maintenance window for each 

HDX system will start at 3am local time. Therefore, the maintenance 
window for HDX systems in Buffalo, NY will start at 3am EST; the 

maintenance window for HDX systems in Denver, CO will start at 3am 

MST; and the maintenance window for HDX systems in San Francisco, CA 

will start at 3am PST.

Click Save.

To implement automatic software updates, complete the following tasks:

 on page 194.

 on page 195.