Polycom Welding System 3725-77601-001H Manual Do Utilizador
Polycom CMA System Operations Guide
436
Polycom, Inc.
f
Click Shutdown
to shut down the redundant server.
4
When the redundant server has shutdown completely, on the primary
server:
a
Turn ON the primary server.
b
Log into the server and go to Admin > Server Settings > Database.
c
On the Database page, select the Use an external SQL Server
database check box.
d
Enter the Database Server IP address or DNS Name.
e
Enter the Database Server Port and click Update.
The system will guide you through formatting or upgrading the
The system will guide you through formatting or upgrading the
external database. The primary server restarts and comes online as
the active server.
Set the Virtual IP Address for the Redundant System
To set the virtual IP address for the redundant system
1
When the primary server has restarted completely, log into the primary
CMA 5000 system server.
2
Go to Admin > Server Settings > Redundant Configuration.
If the two CMA system servers are installed and configured correctly on
If the two CMA system servers are installed and configured correctly on
the network, both servers are displayed in the table on the Redundant
Configuration page.
3
Enter the Virtual IP for the redundant system and click Submit. For
information about this virtual IP address, see
The primary server restarts and comes online as the active server.
4
When the primary server has restarted completely, turn ON the
redundant server and wait for it to boot completely.
Note
Set the virtual IP for the redundant server on the primary server only.