Polycom Welding System 3725-77601-001H Manual Do Utilizador

 

Dial Plan Setup Operations

Polycom, Inc. 

485

Dial plan services are special features that video endpoint system users can 

invoke by dialing the prefix assigned in the CMA system to that service. 
The CMA system has two default dial plan services: 
•

 

These services can be edited and disabled, but not deleted. 
You can also add other gateway or If a service does not appear automatically 

when a device registers with the CMA system, you can define the service 

manually so that it is available for video endpoint system users. In addition, 

you can add services for certain third-party MCU services. 

With Conference on Demand, video endpoint system users can start an 

unscheduled multipoint conference from their endpoint rather than 

requesting this service from an administrator. 
The initiating endpoint uses the capabilities made available through the MCU. 

When Conference on Demand is enabled on the endpoint, the CMA system 

sends the call directly to the MCU. 

The following table provides details on how the Conference on Demand 

service is configured.

Conference on Demand is only available on Polycom RMX and MGC MCUs. It is 
not available on Polycom RMX 1000 MCUs.

Service Type

Conference on Demand (read only)

Enable

Indicates whether or not the service is enabled

Available for New Groups

Indicates whether or not the service is available for 
new user groups

Description

Description (ASCII only) of the service. By default for 
this service, Conference on Demand

Service Prefix

The prefix (ASCII only) for the service. By default for 
this service: con