Polycom Welding System 3725-77601-001H Manual Do Utilizador

 

Dial Plan Setup Operations

Polycom, Inc. 

495

A routing action informs the CMA system what to do based on the dial rule’s 

associated pattern type. The following table shows the available routing 

actions. 

You use custom dial rules to perform these tasks:
• Block calls. For example, you can block all calls to 900 numbers, which 

usually charge a per-minute fee. Create a dial rule with these settings: 
— Pattern type: Prefix
— Prefix to match: 900
— Routing action: Block

Route

All

Allow the call to pass

Block

All

Block the call

Route within 
region

IP Address

Route to any IP address inside the region

Route out of 
region

IP Address

Route to any IP address outside the region

The originating site’s Internet access rules still 
apply.

Route to a 
gateway with 
LCR

Prefix and 
Prefix 
Range

Remove the prefix specified in the dial rule and 
route the remaining dial string to a gateway 
service, which has the specified LCR table

Route to a 
gateway 
service

Prefix and 
Prefix 
Range

Remove the prefix specified in the dial rule and 
route the remaining dial string to the specified 
gateway service

Route to a list 
of gateway 
services

Prefix and 
Prefix 
Range

Modify the dial string specified in the dial rule and 
route the remaining dial string to the specified 
gateway service.

Route to a 
trusted 
neighbor

Prefix and 
Prefix 
Range

Modify the dial string as specified in the dial rule 
and ask the specified neighboring gatekeeper to 
route the modified dial string. If the neighboring 
gatekeeper agrees, route the call.

The neighboring gatekeeper must be configured 
as a region in the CMA system.