Polycom Welding System 3725-77601-001H Manual Do Utilizador
Polycom CMA System Operations Guide
498
Polycom, Inc.
To enable or disable a dialing rule
1
Go to Admin > Dial Plan > Dial Rules.
2
In the Dial Rules list, select the dial rule of interest and click Edit Dialing
Rule.
3
On the Dial Rules - General Information page, check or clear the
Enabled check box.
4
Click OK.
Edit a Dial Rule
To edit a dial rule
1
Go to Admin > Dial Plan > Dial Rules.
2
In the Dial Rules list, select the dial rule of interest and click Edit Dial
Rule.
3
In the Edit Dial Rule dialog box, make the required changes.
4
When you are finished, click OK.
Least-Cost Routing Operations
Least-cost routing (LCR) allows the CMA system to route ISDN or POTS calls
made on paths that incur the lowest expense. You can route calls from one site
through a gateway in another site by referencing LCR tables.
Least-cost routing is useful when sites already have a high-bandwidth
Least-cost routing is useful when sites already have a high-bandwidth
connection between them.
Least-cost routing works with the CMA system’s other routing features.
Setting up least-cost routing requires you to:
• Determine the LCR information to enter in the CMA system.
• Create LCR tables.
• In the device record for MCUs:
Least-cost routing works with the CMA system’s other routing features.
Setting up least-cost routing requires you to:
• Determine the LCR information to enter in the CMA system.
• Create LCR tables.
• In the device record for MCUs:
— Define an H.320 service and select the LCR table to use.
— Define a gateway service and select the H.320 service associated with
— Define a gateway service and select the H.320 service associated with
the LCR table.
Note
Make sure the LCR tables you define match the network setup.