Polycom Welding System 3725-77601-001H Manual Do Utilizador

 

Conference Scheduling Operations

Polycom, Inc. 

59

If the guest has an H.320 (ISDN) endpoint, configure these settings:

Click OK.

Users can only view scheduling information for the conferences that appear in 

their Conference list. By default, schedulers see only their conferences in the 

Conference list, while operators see all the conferences on the system, unless 

areas are defined. In which case operators see all the conferences for the areas 

to which they belong. By default, users assigned other roles cannot view 

conferences.

To see the scheduling information for a future conference, go to 

Conference > Future. To see the scheduling information for an active 

conference, go to Conference > Ongoing.

From the list of All Conferences, select the conference of interest and 

click View.

Use Modified Dial 
Number 

Select this option first (as needed) as it will 
determine the other fields you must configure.

Country

(Not available when Use Modified Dial Number 
is selected.) The country to which the system will 
dial out to the guest. Click Select to view a list of 
country codes.

Area/City Code

(Not available when Use Modified Dial Number 
is selected.) The area code to which the system 
will dial out to the guest.

Number

The participant’s phone number.

Extension

Cannot be configured.

MCU Service

Choose from the list of MCU services defined on 
the MCUs with which the CMA system has 
registered. Leave this at Any Available Service 
unless you have specific knowledge of MCU 
services.