Polk Audio MagniFi Manual Do Proprietário

for more information visit our website at www.polkaudio.com

5

Your subwoofer receives a wireless audio signal from the bar. All you need to 
do is plug in the power cord and make sure the main power switch is ON.

1. Turn off the subwoofer’s AC Mains switch.

2.  Press the SYNC button on the back of the bar and hold for  

three (3) seconds.

3.  The LED on the back of the bar will blink, indicating that the bar and the 

subwoofer are ready to be connected.

4.  Turn on the subwoofer’s AC Mains switch. When the subwoofer LED turns 

solid green, the bar and subwoofer are connected and ready to use.

The MagniFi Soundbar and wireless  
subwoofer are preset at the factory to  
work together. Should your wireless  
subwoofer stop receiving an audio signal,  
follow these instructions to re-establish the 
connection:

Note: If your bar is mounted to the wall, it will need to be removed for this procedure