PLUS Vision U4-237 Manual Do Utilizador
E-21
Power Cable Connections and Switching the Power On/Off
DVI
AUDIO
VIDEO
S-VIDEO
ST
ATUS
SOURCE
ST
ANDB
Y
AUTO
MENU
QUICK
MENU
PC CARD
STATUS
STANDBY
STATUS
STANDBY
STATUS
STANDBY
There is an order in which the power cable is connected and the power is switched on/off.
Operating
1
Connect the AC IN connector of the projector and the power outlet using the supplied power cable.
The STANDBY indicator will light in amber, and the unit will enter the standby mode.
Firmly plug in all the way.
To wall outlet
2
Switch on the projector power
Main unit operation: Press the STANDBY button.
Remote control operation: Press the STANDBY button.
Remote control operation: Press the STANDBY button.
This indicator is also lit green in Eco-mode.
Blinking green
(Approximately 60 seconds)
Lit green
Power is on
The first time the power is switched on after purchase, [Menu Language Select] will be displayed. See Page E-22 for
information about language selection.
• When the power is switched on, the STANDBY indicator changes to blinking green, then lights steadily after about 60
information about language selection.
• When the power is switched on, the STANDBY indicator changes to blinking green, then lights steadily after about 60
seconds and the projection screen is set to the brightness of normal mode. At this time, if the STATUS indicator is lit in
green, [Lamp Mode] is set to “Eco”. See Pages E-28 and E-50 for information about the selection method.
green, [Lamp Mode] is set to “Eco”. See Pages E-28 and E-50 for information about the selection method.
• If the power does not come on, see “When the STATUS Indicator is Lit or Blinking” on Page E-55.
If the “Password” input window is displayed: See Page E-33.
A password is set for this projector.
The projector cannot be used unless the correct password is input.
To turn off the power: See Page E-23.
A password is set for this projector.
The projector cannot be used unless the correct password is input.
To turn off the power: See Page E-23.
The projector is now capable of regular projection.
3
Switch on the power of the connected equipment
Note:
• When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so that it may be reached
• When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so that it may be reached
easily.
• Press the STANDBY button after the STANDBY indicator is lit in amber.
• The included power cable is exclusively for use with the U4-237. Never use it with other products.
• The included power cable is exclusively for use with the U4-237. Never use it with other products.
Lit amber
STATUS
STANDBY
Lit amber
RGB
STANDBY
VIDEO
FREEZE
MUTE
ECO
AUTO
ASPECT
CANCEL
QUICK
MENU
ENTER
Q
1
2
3
4