Plasmon LIBRARIES D875 Manual Do Utilizador

There are two methods for loading media into the D875 - D2175 libraries:

High Speed Bulk Loading (recommended): This method is intended as the first time solution to

mass load the library with media when the library is off-line. This method utilizes all six magazine
slots to load the library.

I/E Port Magazine Loading: This is intended for importing and exporting up to ten pieces of media

in a removable magazine while the library is on-line.

When loading the library for the first time, use the high speed bulk loading method described below:

1. Turn on the power.

2. From the front panel menu select Set Up Library>Offline Operations>Bulk Load Library.

3. Open the library front door and the magazine access door. Note that when the Bulk Load 

Library option is selected, the magazine door opens.

4. Place a pre-loaded magazine in each magazine slot (magazine 1 through magazine 6).

5. When the green LED goes out, remove the appropriate empty magazine and install the 

next full magazine.

Third party software is required to operate the library