Pioneer HD VIDEO SYSTEM HD-V9000 Manual Do Utilizador

En

Use the procedure below to switch the resolution of the 
video signals output from 

COMPONENT VIDEO OUT 

terminal, 

HDMI OUT terminal.

• With some devices (TVs, AV amplifiers, etc.), the 

picture or sound may not be output properly if the 
resolution is switched. If this happens, use the 
OUTPUT RESOLUTION (+, –) buttons to set a 
resolution at which the picture or sound is output 
properly.

• When outputting with a resolution of 1920 x 1080p, 

1920 x 1080i or 1280 x 720p from the 

HDMI OUT or 

COMPONENT VIDEO OUT terminals, the signals 
may be output with a ratio of 16:9, even when 

Screen is set to 4:3 (page 45).

• The picture may not be displayed for several seconds 

when the resolution is switched.

buttons.
The resolution switches each time the button is pressed.

• The current resolution setting can be checked on the 

main unit display. Press the 

LCD button on the main 

unit’s front panel to switch the resolution display.

• The resolution can also be switched at 

Scaler Setting 

(page 45).

DISPLAY button for over 1 second.
The display switches as shown below.

• The firmware version and serial number can also be 

displayed by pressing the 

DISPLAY button on the 

main unit’s front panel.

• To check on the display, see Information display 

(Player Property) on page 51.

V e r .

0 1 . 0 0

S N .

J A T W 0 1 2 3 4 5 J P

Version number

Serial number

Serial number – 12 digits are displayed