Philips WP3891 Manual Do Utilizador

1

B

Never use scouring pads, abrasive cleaning

agents or aggressive liquids such as petrol or

acetone to clean the appliance. 

B

Do not pour water over the pure water

dispenser.

 Clean the outside of the pure water

dispenser regularly with a damp (not wet) 

cloth.

 If you have not used the appliance for 2 days

or more, perform the PureFlush procedure

(see chapter ‘Using the appliance’, section

‘PureFlush’).

 Switch off the pure water dispenser.

 Turn off the water supply to the pure water

dispenser.

  Unscrew the water inlet connector (hold it 

in vertical position to avoid water spillage)

and pull out the macro filter.

 Rinse the macro filter under a running tap.

Remove the dirt from the mesh.

 Put the macro filter back in its original

position.

  Reattach the water inlet connector.

Use the PureFlush function when you use the 

appliance for the first time. Also use the PureFlush 

function if you have not used the appliance for 

more than  days: 

When you replace the filter, the pure water 

dispenser performs the Pure Flush function 

automatically. In this case, 10 litres of water flow 

out of the appliance (see chapter ‘Cleaning and 

maintenance’, section ‘Replacement’).  

B

Do not drink the water that comes out of the

appliance during the PureFlush procedure.

  Switch on the pure water dispenser.

Wait until the dispense button d flashes 

(ready to dispense - manual mode). 

 Place a container with a capacity of at least

10 litres under the pure water dispenser.

 Press and hold the dispense button d for 4

seconds. 

D

If you want to cancel the flushing procedure

while it is in progress, press the power-on

button y to switch off the pure water dispenser.

•

•