Tyco SafeLINC 4100U Manual Do Utilizador

5-15

 
 

The illustration below shows coupler wiring. 
 

 

 

Refer to the guidelines and figures in this topic to use wired media cards. 
 
IMPORTANT:  TB1 on the wired media card must not be used when it is 

 
•  When the 565-413 Interface Card is used with 565-516, -407, or –409 Network 

Card, TB1 on the 565-413 Interface Card cannot be used. Connection to the 
motherboard is required as shown. 

•  The shield should only be connected at one end of the line. The shield is 

connected to the left port. 

•  When wiring leaves the building, 2081-9044 Overvoltage Protectors are 

required. One overvoltage protector is installed where wiring leaves the building; 
another is installed where wiring enters the next building. 

 

4190-9010 Coupler 
Requirements 
(continued)