Tripp Lite SNMP Solo MT-SE-37/02 Manual Do Utilizador

Configuring the NMS

25

To complete the SNMP Solo installation and configuration
process, you must compile the necessary MIBs to configure the
NMS.

Any NMS with a MIB compiler can manage the SNMP Solo
adapter. For instructions on how to compile MIBs for the most
popular NMSs—Novell’s NetWare Management Station,
Hewlett-Packard’s OpenView Network Node Manager, and
SunConnect’s SunNet Manager; see the corresponding heading
below.

Follow these general procedures to configure an NMS:

•  Compile the device MIBs.
•  Add SNMP Solo object to the Management Map.
•  Ping the SNMP Solo.

8. 

Copy the UPS MIB file from the TAR formatted diskette
into the subdirectory /usr/OV/snmp_mibs.

9. 

From the main menu, select Options

10. Load/Unload 

11. Select 

Load.

12. 

Select the MIB file copied earlier.

13. Select 

OK.

1. 

Select the submap then Edit: Add Object.

2. 

Select the group computer.

3. 

With the middle (or opposite) mouse button, drag the
generic symbol subclass device to the submap.