Trilogy Touch Technology Trilogy Commander Digital Intercom 9 Manual Do Utilizador

 

The following hardware is no longer supplied by Trilogy Communications. 

•  500-06-00 is marked 5510 on the card ejector since the base card is manufactured by 

Pro-Bel. It carries a Trilogy designed sub board. 

•  500-06-01 replaced the 500-06-00 and is a single board Trilogy design. 

Ports intended for use with cameras will have the appropriate rear connector back fitted in 
the correct position, as per your requirements. The camera RCU has a passive-mixing pad 
fitted, which necessarily inserts a 25dB loss into the 6

th

 port of the associated matrix card. 

The 500-06-00 6 port interface module has a sub-module fitted on which are the analogue 
input and output buffers. The drawing below shows the layout of the 500-06-00 module, with 
its sub-module.  

Note that the 500-06-00 module is based on a Pro-Bel module numbered 5510. The card 
ejector is marked with the number 5510, not 500-06-00. 

On the sub-module are two links, which must be set correctly to provide gain compensation 
for the loss of the mixing pad. Two positions are provided - “NORM” and “CAMS”. One link 
must be moved to the CAMS position; the second link should be removed for operation with 
cameras.