Triax TSR 1000 Manual Do Utilizador

 

27

 
5.2  TV System 
When you enter the “TV System” menu 
you will see the screen like below: 
1.  Display Mode is used to switch the 

display mode. You can select from 
Auto / PAL / PAL-N / PAL-M / 
NTSC3.58. Press [Volume Up/Down] 
to switch the desired mode. 

2.  Aspect Mode is used to switch the 

screen aspect ratio mode. You can 
select from Auto / 4:3 PS / 4:3 LB / 
16:9. Press [Volume Up/Down] to select the needed mode. 

3.  Video output is use for switching the screen aspect ratio mode. Now we 

provide below options: RGB / CVBS. You can press [Volume Up/ Volume 
Down] key to select each mode circularly. 

4.  VCR Loopthrough is use for switching STB master and VCR master. When 

VCR Loopthrough is STB master mode, video output is available. 

5.  Select RF system between PAL B/G, PAL I, PAL D/K and NTSC M. 
6.  RF Channel: In case your TV is connected through RF modulator (UHF), 

select output channel number you want. 

7.  Press [MENU] to close the “TV System” menu. 
 
5.3  Time & Timer Setting 
When you enter “Time & Timer Setting” a 
menu with this 3 items will be opened. 
1.  Time: When you select “Time” and 

press [OK] then you will see a window 
like the one beside: 
¾

  GMT Usage: This item is used to 

set the time by using the time 
signal from the satellite. Press 
[Volume Up/Down] to change the 
setting. 

¾

  The “GMT Offset” item is only available when “GMT Usage” is set to 

“On”. Press [Volume Up/Down] to set the “GMT Offset” value. With 
every time you press the button the time offset will be 
increased/decreased by half an hour. 

¾

  “Date” and “Time” items are only available when the “GMT Usage” is 

set to “Off”. Press [Volume Up/Down] to select one item and use 
number buttons to input time and date directly.