Triax DVB 75SI Manual Do Utilizador
TRIAX DVB 75SI
26
circular left or circular right). Reception of
both types of polarisation requires two
single LNBs or a V/H-LNB (Universal
LNB).
both types of polarisation requires two
single LNBs or a V/H-LNB (Universal
LNB).
Receiver: see satellite receiver
Satellite:
A designation for the transmitting unit in
space. Most often referred to by name
and position, e.g. ASTRA 19° East,
EUTELSAT 13° East
space. Most often referred to by name
and position, e.g. ASTRA 19° East,
EUTELSAT 13° East
Satellite receiver:
The signals received and converted by
the LNB cannot be processed by the TV.
The satellite receiver processes them,
and transmits audio and video signals
(AV) to the TV through its outputs.
the LNB cannot be processed by the TV.
The satellite receiver processes them,
and transmits audio and video signals
(AV) to the TV through its outputs.
SCART:
A connector on TV sets, VCRs, satellite
receivers and other entertainment
equipment for transmission of audio
(sound) and video (picture) signals (AV).
receivers and other entertainment
equipment for transmission of audio
(sound) and video (picture) signals (AV).
Transponder:
Carries out the processing of one or
more programmes from a satellite, i.e.
more programmes from a satellite, i.e.
reception of data from earth station,
amplification and radiation/transmission
to earth.
amplification and radiation/transmission
to earth.
Universal LNB:
A designation for a three-band LNB. For
reception of the ranges FFS (10.70 -
11.70 GHz), BBS (11.70 - 12.50 GHz)
and FFS High Band (12.50 - 12.75 GHz).
The total range is divided into two bands:
reception of the ranges FFS (10.70 -
11.70 GHz), BBS (11.70 - 12.50 GHz)
and FFS High Band (12.50 - 12.75 GHz).
The total range is divided into two bands:
Low Band: 10.70 - 11.80 GHz; LOF 9750 MHz
High Band: 11.70 - 12.75 GHz; LOF 10600 MHz
Power supply:
LNBs are powered through the coaxial
cable to which the receiver supplies a
voltage of 14 or 18 Volt.
cable to which the receiver supplies a
voltage of 14 or 18 Volt.
Outdoor unit:
A designation for the equipment
mounted outside, consisting of satellite
dish/offset dish and one or more LNBs
for reception of signals from one or more
satellites, and DiSEqC converters, if
any.
mounted outside, consisting of satellite
dish/offset dish and one or more LNBs
for reception of signals from one or more
satellites, and DiSEqC converters, if
any.
Viacces:
Digital coding method.
7HFKQLFDOVSHFLILFDWLRQV
Front end:
Input frequency range: 950...2150 MHz
Input level: -65 dBm ... -25 dBm
Noise level: max. 12 dB
Tuner input: F-connector
Input impedance: 75 Ohm
AFC-pull-in range: +/- 3 MHz
Demodulation: Shaped QPSK
Symbol rate: 2...32 Mbauds, SCPC comp.
FEC: Viterbi and Reed-Solomon
Viterbi rates: 1/2, 2/3, 3/4, 5/6, 7/8, auto
(K=7)
Input frequency range: 950...2150 MHz
Input level: -65 dBm ... -25 dBm
Noise level: max. 12 dB
Tuner input: F-connector
Input impedance: 75 Ohm
AFC-pull-in range: +/- 3 MHz
Demodulation: Shaped QPSK
Symbol rate: 2...32 Mbauds, SCPC comp.
FEC: Viterbi and Reed-Solomon
Viterbi rates: 1/2, 2/3, 3/4, 5/6, 7/8, auto
(K=7)
Video:
Video compression: MPEG-2 and MPEG-1
compatible
Active picture surface: 720 Pixel x 576 lines
Picture format: 4:3 / 16:9
Pictorial material: 16:9 Automatic
adjustment to 16:9 TV (via SCART)
Video compression: MPEG-2 and MPEG-1
compatible
Active picture surface: 720 Pixel x 576 lines
Picture format: 4:3 / 16:9
Pictorial material: 16:9 Automatic
adjustment to 16:9 TV (via SCART)
Letterbox filtering for 4:3 TV
Audio:
Audio compression: MPEG-1 & MPEG-2 I+II
Audio mode: Dual (main/sub), stereo
Sample frequencies: 32 kHz, 44.1 kHz, 48
kHz, 16 kHz, 22.05 kHz, 24 kHz
Audio parameter: Analog output
Output level: L/R 0.5 r.m.s. (nominal)
Output impedance: 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < - 65 dB
Dynamic range > 60 dB
Audio parameter: Analog input
Input level: L/R 0.5 V r.m.s. (nominal)
Input impedance > 40 kOhm
Audio parameter: Digital / electrical output
(SP/DIF): Output level: 0.5 V ss at 75 Ohm
Sample frequencies: 32 kHz, 44.1 kHz, 48
kHz over phono connector
Audio compression: MPEG-1 & MPEG-2 I+II
Audio mode: Dual (main/sub), stereo
Sample frequencies: 32 kHz, 44.1 kHz, 48
kHz, 16 kHz, 22.05 kHz, 24 kHz
Audio parameter: Analog output
Output level: L/R 0.5 r.m.s. (nominal)
Output impedance: 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < - 65 dB
Dynamic range > 60 dB
Audio parameter: Analog input
Input level: L/R 0.5 V r.m.s. (nominal)
Input impedance > 40 kOhm
Audio parameter: Digital / electrical output
(SP/DIF): Output level: 0.5 V ss at 75 Ohm
Sample frequencies: 32 kHz, 44.1 kHz, 48
kHz over phono connector