Triax SR-26 Manual Do Utilizador

- 10 -

In “LNB NO” line, 8 or 16 different LNB configurations (corresponding to the “LNB NO”

line in the installation page) can be chosen by using “+”,”-” (8 for DiSEqC OFF, 16 for

DiSEqC ON mode). At every LNB NO changing, the video frequency is driven accord-

ing to selected LNB frequency.
User can switch to second customizing page by pressing “P+” in this line.
In “PR. FREQ.” line, the program frequency can be entered in two different ways:
i) Direct access. For example to enter 10921MHz just press 1-0-9-2-1 buttons one

by one.

ii) Increasing/decreasing frequency with 1 MHz steps using “+ “,”- “ buttons.
By pressing continually to “+” or “-”, video search begins. Video search stops auto-

matically after tuning to another program or until the end of frequency band if there is

no program after/before the frequency that video search began. User can exit video

search manually by pressing “TV” button only.
In “AUDIO NO” line, audio frequency can be chosen among 15 preset audio frequen-

cies or user-defined 16

th

 mode. The user can change the audio frequency and mode

only when audio no is 16. While the other 15 numbers are selected, user can’t reach

these lines by pressing “P-“ button in this line.
At the 16

th 

audio type, in the “AU. MODE” line, Stereo/Mono is switched for this audio

frequency. In the “AU. FREQ.” line, the audio frequency is changed like program fre-

quency. The range for audio frequency is between 5.00 -9.00 MHz.

In the “SYSTEM” line, select
• “TV” to watch a channel
• “RADIO” to listen to audio only with blue background on screen. A musical note sym-

bol will appear in program page if a program is set to radio.
• “PAL DEC.” to watch a pay TV channel that can be only watched by PAL decoder
• “MAC DEC.” to watch a pay TV channel that can be only watched by a D2MAC decoder.
• “DEEMPH.” to watch a pay TV channel that can be only watched by a D2MAC decoder.
In this line, user can switch to second customizing page by pressing “P-“.
At the “DEEMPH.” line, 3 different de-emphasis modes can be selected. These are

FLAT, 50µs, 75µs.
At the “AUDIO BW” line, 7 different audio bandwidth modes (80/110/130/180/ 230/380/

500kHz) can be selected.
At the”DNR” line, Dynamic Noise Reduction can be switched as “ON/OFF” with “+”,

“-“ buttons.
“CONTRAST” line is used to adjust the contrast level of programs from 1 up to 50 with

“+”, “-“ buttons.
In “PR. LOCK” line, by selecting “YES” with “+”, “-“ buttons, parental lock is set. The

user will see blue background even if there is a video signal. And a “lock” character

will appear under the program number after exiting the menu.