Parker Products WCS-SIF-01 Manual Do Utilizador

Página de 20
6
WCS-SIF-01
Training & Maintenance Manual
Pneumatic
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics
Specifications
Pneumatic System  
with Low Impact and 
Rapid Approach Control
Description
Pneumatic valve block for use with pneumatic weld  
gun cylinders. The block has an integrated low impact 
system and is provided with two solenoid operated 
“Namur” or ISO size  valves.  One valve for the retract 
(pre-stroke) and one for the weld stroke.  The valves  
can be of the single solenoid type or the double 
solenoid type. The block is available for different 
constructions of cylinders:
DH / WH = 3 Ported Cylinders
DP / WP =  and 4 Ported Cylinders
Ordering Code:
 See pages 7 – 13.
Dimensions:
 See pages 15 – 18.
Applications
The Spotwelding System can be used with any 
Pneumatic Spot Weld Cylinder.
Mounting
The weld block can either be mounted on the side of 
the robot or directly to the cylinder.  See pages 10 – 1 
for bolt hole patterns for robot mount.  Consult Parker 
for cylinder mount application.
Technical Data
Medium .......................... Compressed air, filtered to 
40µ and dried to a dewpoint 
of 37°F (3°C), lubricated 
or non-lubricated. Once 
lubricated air is applied, this 
must be maintained.
Working Pressure ..........37 to 145 PSIG (.5 to 10 bar) 
  WH Series Air Operated  
  Quick Exhaust  ..........40 to 115 PSIG (.7 to 7.9 bar)
Ambient Temperature ......  41°F to 10°F (5°C to 49°C)
Weight – 
  DP  ................................................. 1.0 lbs (5.4 kgs) 
  DH  ................................................... 7.0 lbs (3. kgs) 
  WP (with Baseplate)  ...................... 14.0 lbs (6.4 kgs) 
  WH (with Baseplate) ...................... 18.0 lbs (8. kgs)
Pneumatic Valve 
  4 VDC 
   
Operating Voltage Solenoids .... 4 VDC +10/-15% 
   
Power Consumption .....................................4.8W 
   
Class of Protection ....................... IP65 (with plug 
   
 
mounted)
   
Connector ............................ M1, mm, 30mm, 
   
 
Auto (ISO  only)
  10 VAC 
   
Operating Voltage Solenoids ...10 VAC +10/-15% 
   
Frequency ............................................50 / 60 Hz 
   
Power Consumption ..................... 7.8 VA / 6.3 VA 
   
Class of Protection ....................... IP65 (with plug 
   
 
mounted)
   
Connector ............................ M1, mm, 30mm, 
   
 
Auto (WP / WH only)
Proximity Sensor 
  4 VDC 
   
Supply Voltage ................................10 to 30 VDC 
   
Rated Operational Current ........................00mA 
   
Degree of Protection .....................................IP67 
   
Ambient Temperature Range ....... -13°F to 158°F
   
 
 
(-5°C to 70°C)
   
Switching Indication ................... By LED (Yellow) 
   
Output ..............................................PNP or NPN
  10 VDC (Consult factory for availability) 
   
Supply Voltage .............................. 0 to 140 VAC 
   
Frequency ......................................... 50 or 60 Hz 
   
Supply Voltage Indication ........... By LED (Green) 
   
Rated Operational Current .......................400 mA 
   
Degree of Protection .....................................IP67 
   
Ambient Temperature Range ......  -13°F to 158°F
   
 
 
(-5°C - +70°C)
   
Switching Indication ................. By LED (Orange)
Service Kits:
 See page 9.