Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Panasonic
  4. Arbitrator 360
  5. Guia De Utilização

Panasonic Arbitrator 360 Guia De Utilização

Download
Página de 119

Setup
.(continued)

Item
Factory-Preset
Description
Preset3*
1
Preset 3 can be set.
Form
2 Channels
The channel mode can be set.
Setting values: 1Channel, 2Channels, 4Channels QUAD,  
4Channels PANORAMA, 5Channels QUAD,  
5Channels PANORAMA, None
Pattern
Main 1, Sub 2 The combination of cameras displayed as Main and Sub videos can be 
set. 
Setting values for Form and Pattern: 
Form
Pattern
1Channel
Main 1, Sub -
Main 2, Sub -
Main 3, Sub -
2Channels
Main 1, Sub 2
Main 1, Sub 3
Main 2, Sub 3
4Channels QUAD
Main -, Sub 1456
Main -, Sub 2456
Main -, Sub 3456
4Channels PANORAMA
Main -, Sub 1456
Main -, Sub 2456
Main -, Sub 3456
5Channels QUAD
Main 1, Sub 2456
Main 1, Sub 3456
Main 2, Sub 3456
Main 3, Sub 2456*
2
5Channels PANORAMA
Main 1, Sub 2456
Main 1, Sub 3456
Main 2, Sub 3456
Main 3, Sub 2456*
2
None*
3
Audio In Select
The audio inputs can be selected.
Audio1
Wireless Mic
The audio signal connected to the [AUDIO IN 1] connector can be selected. 
Setting value: Mic (microphone)
Wireless Mic (wireless microphone)
Off (no connection)
Audio2
Mic
The audio signal connected to the [AUDIO IN 2] connector can be selected. 
Setting value: Mic (microphone)
Wireless Mic (wireless microphone)
Off (no connection)
Audio3 
OFF
The audio signal connected to the [AUDIO IN 3] connector can be selected. 
Setting value: Mic (microphone)
Wireless Mic (wireless microphone)
Off (no connection)
Audio4
OFF
The audio signal connected to the [AUDIO IN 4] connector can be selected. 
Setting value: Mic (microphone)
Wireless Mic (wireless microphone)
Off (no connection)
Init Audio Rec after 
power ON
ON
Initial audio output setting (upon power-on)
Setting values:  ON, OFF, LAST*
4
*1  Selectable Form and Pattern of Preset1, Preset2, 
and Preset3 depend on the settings of Connection 
Camera.
*2  This setting is enabled when the camera connected 
to the [CAMERA 1] connector is set to OFF.
*3  “None” is not selectable for Preset1 unless all 
camera connections are set to OFF.
*4  The setting upon the last power-off will be restored 
when the camera is turned on. If the Memory Card 
Video Recorder is not turned off properly, the setting 
data upon power-off may not be stored properly.